dmesg - INTEL SSDSC2CT12 - Intel Xeon E5345
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.1-031001-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201307131550 SMP Sat Jul 13 19:51:31 UTC 2013
Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.1-031001-generic root=/dev/mapper/vg_root-lv_root ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bfb4ffff] usable
BIOS-e820: [mem 0x00000000bfb50000-0x00000000bfb65fff] reserved
BIOS-e820: [mem 0x00000000bfb66000-0x00000000bfb85bff] ACPI data
BIOS-e820: [mem 0x00000000bfb85c00-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Dell Inc. PowerEdge 2950/0NR282, BIOS 2.6.1 04/20/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 100000000 mask F00000000 write-back
3 base 200000000 mask E00000000 write-back
4 base 400000000 mask FC0000000 write-back
5 base 0BFC00000 mask FFFC00000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 1GB, type WB
reg 5, base: 3068MB, range: 4MB, type UC
total RAM covered: 16380M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 8M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3068MB, range: 4MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 1GB, type WB
e820: update [mem 0xbfc00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfb50 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fca000, 0x01fcafff] PGTABLE
BRK [0x01fcb000, 0x01fcbfff] PGTABLE
BRK [0x01fcc000, 0x01fccfff] PGTABLE
init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[mem 0x43fe00000-0x43fffffff] page 2M
BRK [0x01fcd000, 0x01fcdfff] PGTABLE
init_memory_mapping: [mem 0x43c000000-0x43fdfffff]
[mem 0x43c000000-0x43fdfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x43bffffff]
[mem 0x400000000-0x43bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbfb4ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbf9fffff] page 2M
[mem 0xbfa00000-0xbfb4ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
BRK [0x01fce000, 0x01fcefff] PGTABLE
RAMDISK: [mem 0x36192000-0x370c0fff]
ACPI: RSDP 00000000000f2160 00024 (v02 DELL )
ACPI: XSDT 00000000000f21fc 000CC (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000bfb83524 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000bfb66000 04996 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000bfb85c00 00040
ACPI: APIC 00000000bfb83078 0009E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000bfb83130 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000bfb83184 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000bfb831c0 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000bfb83200 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000bfb83338 00176 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000bfb6e2dc 00210 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000bfb6e4ec 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000bfb6e15c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000bfb6e18c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000bfb834bc 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000bfb6a996 00412 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfb6b03c 00412 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfb6b6e2 00412 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfb6bd88 00412 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfb6c42e 00412 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfb6cad4 00412 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfb6d17a 00412 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfb6d820 00412 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfb6dec6 00293 (v01 DELL PE_SC3 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x00000000-0x43fffffff]
NODE_DATA [mem 0x43ffed000-0x43fff1fff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0xbfb4ffff]
node 0: [mem 0x100000000-0x43fffffff]
On node 0 totalpages: 4193007
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 12206 pages used for memmap
DMA32 zone: 781136 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3407872 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64])
IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 104
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfb50000 - 00000000bfb66000
PM: Registered nosave memory: 00000000bfb66000 - 00000000bfb85000
PM: Registered nosave memory: 00000000bfb85000 - 00000000bfb86000
PM: Registered nosave memory: 00000000bfb86000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88043fc00000 s86464 r8192 d24128 u262144
pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4127467
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.1-031001-generic root=/dev/mapper/vg_root-lv_root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16410752k/17825792k available (7243k kernel code, 1053764k absent, 361276k reserved, 6047k data, 1360k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Experimental no-CBs for all CPUs
Experimental no-CBs CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1832 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2327.608 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4655.21 BogoMIPS (lpj=9310432)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 30168 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz (fam: 06, model: 0f, stepping: 07)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (37241.17 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
PCI: Dell PowerEdge 2950 detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff880429442488), AE_NOT_FOUND (20130328/psparse-537)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:25c0] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:25e2] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:25f8] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:25f9] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xace0-0xacff]
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xacc0-0xacdf]
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xaca0-0xacbf]
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xdea00400-0xdea007ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
pci 0000:00:1f.2: [8086:2680] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io 0xac98-0xac9f]
pci 0000:00:1f.2: reg 14: [io 0xac90-0xac93]
pci 0000:00:1f.2: reg 18: [io 0xac80-0xac87]
pci 0000:00:1f.2: reg 1c: [io 0xac78-0xac7b]
pci 0000:00:1f.2: reg 20: [io 0xac60-0xac6f]
pci 0000:00:1f.2: reg 24: [mem 0xdea00000-0xdea003ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:06:00.0: [8086:3500] type 01 class 0x060400
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.3: [8086:350c] type 01 class 0x060400
pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 06-0b]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xd2000000-0xd9ffffff]
pci 0000:07:00.0: [8086:3510] type 01 class 0x060400
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: [8086:3514] type 01 class 0x060400
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07-0a]
pci 0000:06:00.0: bridge window [io 0xe000-0xefff]
pci 0000:06:00.0: bridge window [mem 0xd4000000-0xd9ffffff]
pci 0000:08:00.0: [1166:0103] type 01 class 0x060400
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PCI bridge to [bus 08-09]
pci 0000:07:00.0: bridge window [mem 0xd6000000-0xd9ffffff]
pci 0000:09:00.0: [14e4:164c] type 00 class 0x020000
pci 0000:09:00.0: reg 10: [mem 0xd6000000-0xd7ffffff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0: bridge window [mem 0xd6000000-0xd9ffffff]
pci 0000:0a:00.0: [8086:105e] type 00 class 0x020000
pci 0000:0a:00.0: reg 10: [mem 0xd5ee0000-0xd5efffff]
pci 0000:0a:00.0: reg 14: [mem 0xd5ec0000-0xd5edffff]
pci 0000:0a:00.0: reg 18: [io 0xece0-0xecff]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.1: [8086:105e] type 00 class 0x020000
pci 0000:0a:00.1: reg 10: [mem 0xd5ea0000-0xd5ebffff]
pci 0000:0a:00.1: reg 14: [mem 0xd5e80000-0xd5e9ffff]
pci 0000:0a:00.1: reg 18: [io 0xecc0-0xecdf]
pci 0000:0a:00.1: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: PCI bridge to [bus 0a]
pci 0000:07:01.0: bridge window [io 0xe000-0xefff]
pci 0000:07:01.0: bridge window [mem 0xd5e00000-0xd5ffffff]
pci 0000:06:00.3: PCI bridge to [bus 0b]
pci 0000:01:00.0: [8086:0370] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: [8086:0372] type 01 class 0x060400
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 01-03]
pci 0000:00:03.0: bridge window [mem 0xde700000-0xde9fffff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:02:0e.0: [1028:0015] type 00 class 0x010400
pci 0000:02:0e.0: reg 10: [mem 0xf80f0000-0xf80fffff pref]
pci 0000:02:0e.0: reg 18: [mem 0xde9c0000-0xde9dffff]
pci 0000:02:0e.0: reg 30: [mem 0xde800000-0xde807fff pref]
pci 0000:02:0e.0: supports D1
pci 0000:01:00.0: PCI bridge to [bus 02]
pci 0000:01:00.0: bridge window [mem 0xde800000-0xde9fffff]
pci 0000:01:00.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:01:00.2: PCI bridge to [bus 03]
pci 0000:0c:00.0: [8086:105e] type 00 class 0x020000
pci 0000:0c:00.0: reg 10: [mem 0xde5e0000-0xde5fffff]
pci 0000:0c:00.0: reg 14: [mem 0xde5c0000-0xde5dffff]
pci 0000:0c:00.0: reg 18: [io 0xdce0-0xdcff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.1: [8086:105e] type 00 class 0x020000
pci 0000:0c:00.1: reg 10: [mem 0xde5a0000-0xde5bffff]
pci 0000:0c:00.1: reg 14: [mem 0xde580000-0xde59ffff]
pci 0000:0c:00.1: reg 18: [io 0xdcc0-0xdcdf]
pci 0000:0c:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 0c]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xde500000-0xde6fffff]
pci 0000:00:05.0: PCI bridge to [bus 0d]
pci 0000:0e:00.0: [8086:105e] type 00 class 0x020000
pci 0000:0e:00.0: reg 10: [mem 0xde3e0000-0xde3fffff]
pci 0000:0e:00.0: reg 14: [mem 0xde3c0000-0xde3dffff]
pci 0000:0e:00.0: reg 18: [io 0xcce0-0xccff]
pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0e:00.1: [8086:105e] type 00 class 0x020000
pci 0000:0e:00.1: reg 10: [mem 0xde3a0000-0xde3bffff]
pci 0000:0e:00.1: reg 14: [mem 0xde380000-0xde39ffff]
pci 0000:0e:00.1: reg 18: [io 0xccc0-0xccdf]
pci 0000:0e:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 0e]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xde300000-0xde4fffff]
pci 0000:00:07.0: PCI bridge to [bus 0f]
pci 0000:04:00.0: [1166:0103] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 04-05]
pci 0000:00:1c.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:05:00.0: [14e4:164c] type 00 class 0x020000
pci 0000:05:00.0: reg 10: [mem 0xda000000-0xdbffffff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:10:0d.0: [1002:515e] type 00 class 0x030000
pci 0000:10:0d.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:10:0d.0: reg 14: [io 0xbc00-0xbcff]
pci 0000:10:0d.0: reg 18: [mem 0xde2d0000-0xde2dffff]
pci 0000:10:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:10:0d.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 10] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xde100000-0xde2fffff]
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfdffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
acpi PNP0A08:00: Requesting ACPI _OSC control (0x15)
acpi PNP0A08:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12)
ACPI: Enabled 1 GPEs in block 00 to 1F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:10:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:10:0d.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xbfb50000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (disabled)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0880-0x08bf] has been reserved
system 00:07: [io 0x08c0-0x08df] has been reserved
system 00:07: [io 0x08e0-0x08e3] has been reserved
system 00:07: [io 0x0900] has been reserved
system 00:07: [io 0x0c00-0x0c7f] has been reserved
system 00:07: [io 0x0ca0-0x0ca7] has been reserved
system 00:07: [io 0x0ca9-0x0cab] has been reserved
system 00:07: [io 0x0cad-0x0caf] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0ca8] has been reserved
system 00:08: [io 0x0cac] has been reserved
system 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04-05] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-05] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0: bridge window [mem 0xd6000000-0xd9ffffff]
pci 0000:07:00.0: PCI bridge to [bus 08-09]
pci 0000:07:00.0: bridge window [mem 0xd6000000-0xd9ffffff]
pci 0000:07:01.0: PCI bridge to [bus 0a]
pci 0000:07:01.0: bridge window [io 0xe000-0xefff]
pci 0000:07:01.0: bridge window [mem 0xd5e00000-0xd5ffffff]
pci 0000:06:00.0: PCI bridge to [bus 07-0a]
pci 0000:06:00.0: bridge window [io 0xe000-0xefff]
pci 0000:06:00.0: bridge window [mem 0xd4000000-0xd9ffffff]
pci 0000:06:00.3: PCI bridge to [bus 0b]
pci 0000:00:02.0: PCI bridge to [bus 06-0b]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xd2000000-0xd9ffffff]
pci 0000:01:00.0: PCI bridge to [bus 02]
pci 0000:01:00.0: bridge window [mem 0xde800000-0xde9fffff]
pci 0000:01:00.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:01:00.2: PCI bridge to [bus 03]
pci 0000:00:03.0: PCI bridge to [bus 01-03]
pci 0000:00:03.0: bridge window [mem 0xde700000-0xde9fffff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 0c]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xde500000-0xde6fffff]
pci 0000:00:05.0: PCI bridge to [bus 0d]
pci 0000:00:06.0: PCI bridge to [bus 0e]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xde300000-0xde4fffff]
pci 0000:00:07.0: PCI bridge to [bus 0f]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:00:1c.0: PCI bridge to [bus 04-05]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:10:0d.0: BAR 6: assigned [mem 0xde100000-0xde11ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 10]
pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xde100000-0xde2fffff]
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xd2000000-0xd9ffffff]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xd4000000-0xd9ffffff]
pci_bus 0000:08: resource 1 [mem 0xd6000000-0xd9ffffff]
pci_bus 0000:09: resource 1 [mem 0xd6000000-0xd9ffffff]
pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xd5e00000-0xd5ffffff]
pci_bus 0000:01: resource 1 [mem 0xde700000-0xde9fffff]
pci_bus 0000:01: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xde800000-0xde9fffff]
pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0c: resource 1 [mem 0xde500000-0xde6fffff]
pci_bus 0000:0e: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0e: resource 1 [mem 0xde300000-0xde4fffff]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0xda000000-0xddffffff]
pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xda000000-0xddffffff]
pci_bus 0000:10: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:10: resource 1 [mem 0xde100000-0xde2fffff]
pci_bus 0000:10: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
pci_bus 0000:10: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:10: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:10: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:10: resource 7 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:10: resource 8 [mem 0xfed40000-0xfed44fff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:01:00.0: rerouting interrupts for [8086:0370]
pci 0000:01:00.2: rerouting interrupts for [8086:0372]
pci 0000:10:0d.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15548k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbb50000-0xbfb50000] (64MB) mapped at [ffff8800bbb50000-ffff8800bfb4ffff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1374380169.732:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32082
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 104 for MSI/MSI-X
pcieport 0000:00:03.0: irq 105 for MSI/MSI-X
pcieport 0000:00:04.0: irq 106 for MSI/MSI-X
pcieport 0000:00:05.0: irq 107 for MSI/MSI-X
pcieport 0000:00:06.0: irq 108 for MSI/MSI-X
pcieport 0000:00:07.0: irq 109 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 110 for MSI/MSI-X
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:00.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.1: Signaling PME through PCIe PME interrupt
pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:0e.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0e:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
ERST: Failed to get Error Log Address Range.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata2: port disabled--ignoring
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xac98 ctl 0xac90 bmdma 0xac60 irq 23
ata4: SATA max UDMA/133 cmd 0xac80 ctl 0xac78 bmdma 0xac68 irq 23
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 21, io mem 0xdea00400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.1-031001-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ace0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.1-031001-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000acc0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.1-031001-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000aca0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.1-031001-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d96559188acdef4b9025dc72da4d9e93d27d5b45'
registered taskstats version 1
ata1.00: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462D, DE04, max UDMA/33
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:03: setting system clock to 2013-07-21 04:16:10 UTC (1374380170)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSL462D DE04 PQ: 0 ANSI: 5
ata4.00: ATA-8: WDC WD10EALX-009BA0, 15.01H15, max UDMA/133
ata4.00: 1953525168 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata3.00: ATA-9: INTEL SSDSC2CT120A3, 300i, max UDMA/133
ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2CT12 300i PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA WDC WD10EALX-009 15.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: unknown partition table
sd 3:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 1360k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 936k freed
Freeing unused kernel memory: 868k freed
udevd[155]: starting version 175
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:0a:00.0: Disabling ASPM L1
e1000e 0000:0a:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0a:00.0: irq 111 for MSI/MSI-X
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0
megaraid_sas 0000:02:0e.0: PCI IRQ 78 -> rerouted to legacy IRQ 18
megasas: FW now in Ready state
bnx2 0000:05:00.0 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem da000000, IRQ 16, node addr 00:1a:a0:24:ad:67
bnx2 0000:09:00.0 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d6000000, IRQ 16, node addr 00:1a:a0:24:ad:69
usb 1-1: new high-speed USB device number 2 using ehci-pci
megasas_init_mfi: fw_support_ieee=0
megasas: INIT adapter done
scsi4 : LSI SAS based MegaRAID driver
megaraid_sas: fw state:c0000000
megasas: fwstate:c0000000, dis_OCR=0
scsi 4:0:2:0: Direct-Access ATA WDC WD10EALX-009 1H15 PQ: 0 ANSI: 5
scsi 4:0:3:0: Direct-Access ATA WDC WD10EALX-009 1H15 PQ: 0 ANSI: 5
e1000e 0000:0a:00.0 eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:36:46:b2
e1000e 0000:0a:00.0 eth2: Intel(R) PRO/1000 Network Connection
e1000e 0000:0a:00.0 eth2: MAC: 0, PHY: 4, PBA No: C57721-005
e1000e 0000:0a:00.1: Disabling ASPM L1
e1000e 0000:0a:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0a:00.1: irq 112 for MSI/MSI-X
usb 1-1: New USB device found, idVendor=413c, idProduct=a001
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
scsi 4:0:8:0: Enclosure DP BACKPLANE 1.05 PQ: 0 ANSI: 5
scsi 4:0:8:0: Attached scsi generic sg3 type 13
usb 1-5: new high-speed USB device number 3 using ehci-pci
ses 4:0:8:0: Attached Enclosure device
e1000e 0000:0a:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:36:46:b3
e1000e 0000:0a:00.1 eth3: Intel(R) PRO/1000 Network Connection
e1000e 0000:0a:00.1 eth3: MAC: 0, PHY: 4, PBA No: C57721-005
e1000e 0000:0c:00.0: Disabling ASPM L1
e1000e 0000:0c:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0c:00.0: irq 113 for MSI/MSI-X
usb 1-5: New USB device found, idVendor=04b4, idProduct=6560
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 2327.523 MHz
Switching to clocksource tsc
usb 1-1.1: new full-speed USB device number 4 using ehci-pci
e1000e 0000:0c:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:36:45:f2
e1000e 0000:0c:00.0 eth4: Intel(R) PRO/1000 Network Connection
e1000e 0000:0c:00.0 eth4: MAC: 0, PHY: 4, PBA No: C57721-005
e1000e 0000:0c:00.1: Disabling ASPM L1
e1000e 0000:0c:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0c:00.1: irq 114 for MSI/MSI-X
usb 1-1.1: New USB device found, idVendor=413c, idProduct=0000
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: DRAC5
usb 1-1.1: Manufacturer: Dell
usb 1-1.1: SerialNumber: 0000000
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
hid-generic 0003:413C:0000.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1/input0
input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input2
hid-generic 0003:413C:0000.0002: input,hidraw1: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1/input1
usb 1-1.2: new high-speed USB device number 5 using ehci-pci
e1000e 0000:0c:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:36:45:f3
e1000e 0000:0c:00.1 eth5: Intel(R) PRO/1000 Network Connection
e1000e 0000:0c:00.1 eth5: MAC: 0, PHY: 4, PBA No: C57721-005
e1000e 0000:0e:00.0: Disabling ASPM L1
e1000e 0000:0e:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0e:00.0: irq 115 for MSI/MSI-X
usb 1-1.2: New USB device found, idVendor=413c, idProduct=0001
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: DRAC5 VIRTUAL MEDIA
usb 1-1.2: Manufacturer: DELL INC.
usb 1-1.2: SerialNumber: 1028 123456
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi5 : usb-storage 1-1.2:1.0
usb-storage 1-1.2:1.1: USB Mass Storage device detected
scsi6 : usb-storage 1-1.2:1.1
usbcore: registered new interface driver usb-storage
e1000e 0000:0e:00.0 eth6: (PCI Express:2.5GT/s:Width x4) 00:15:17:36:44:06
e1000e 0000:0e:00.0 eth6: Intel(R) PRO/1000 Network Connection
e1000e 0000:0e:00.0 eth6: MAC: 0, PHY: 4, PBA No: C57721-005
e1000e 0000:0e:00.1: Disabling ASPM L1
e1000e 0000:0e:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0e:00.1: irq 116 for MSI/MSI-X
e1000e 0000:0e:00.1 eth7: (PCI Express:2.5GT/s:Width x4) 00:15:17:36:44:07
e1000e 0000:0e:00.1 eth7: Intel(R) PRO/1000 Network Connection
e1000e 0000:0e:00.1 eth7: MAC: 0, PHY: 4, PBA No: C57721-005
scsi 5:0:0:0: CD-ROM Dell Virtual CDROM 123 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:0: Direct-Access Dell Virtual Floppy 123 PQ: 0 ANSI: 0 CCS
sr1: scsi-1 drive
sr 5:0:0:0: Attached scsi CD-ROM sr1
sr 5:0:0:0: Attached scsi generic sg4 type 5
sd 6:0:0:0: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
floppy0: no floppy controllers found
bio: create slab at 1
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
Adding 11997180k swap on /dev/mapper/vg_root-lv_swap. Priority:-1 extents:1 across:11997180k SSFS
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
udevd[454]: starting version 175
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp: driver loaded but no devices found
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
intel_rng: FWH not detected
microcode: CPU0 sig=0x6f7, pf=0x40, revision=0x67
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x01B2).
[drm] register mmio base: 0xDE2D0000
[drm] register mmio size: 65536
radeon 0000:10:0d.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (16M used)
radeon 0000:10:0d.0: GTT: 512M 0x00000000D0000000 - 0x00000000EFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 8214744 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 16M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x0000000036E00000).
radeon 0000:10:0d.0: WB disabled
radeon 0000:10:0d.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xffff880036dd6000
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
[drm] radeon: ring at 0x00000000D0001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
microcode: CPU1 sig=0x6f7, pf=0x40, revision=0x67
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
microcode: CPU2 sig=0x6f7, pf=0x40, revision=0x67
microcode: CPU3 sig=0x6f7, pf=0x40, revision=0x67
microcode: CPU4 sig=0x6f7, pf=0x40, revision=0x67
[drm] fb mappable at 0xF0040000
[drm] vram apper at 0xF0000000
[drm] size 1310720
[drm] fb depth is 8
[drm] pitch is 1280
fbcon: radeondrmfb (fb0) is primary device
gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
gpio_ich: GPIO from 206 to 255 on gpio_ich
microcode: CPU5 sig=0x6f7, pf=0x40, revision=0x67
microcode: CPU6 sig=0x6f7, pf=0x40, revision=0x67
type=1400 audit(1374380181.127:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=574 comm="apparmor_parser"
type=1400 audit(1374380181.127:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=574 comm="apparmor_parser"
type=1400 audit(1374380181.127:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=574 comm="apparmor_parser"
microcode: CPU7 sig=0x6f7, pf=0x40, revision=0x67
type=1400 audit(1374380181.147:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=559 comm="apparmor_parser"
type=1400 audit(1374380181.147:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=559 comm="apparmor_parser"
type=1400 audit(1374380181.147:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=559 comm="apparmor_parser"
Console: switching to colour frame buffer device 160x64
radeon 0000:10:0d.0: fb0: radeondrmfb frame buffer device
radeon 0000:10:0d.0: registered panic notifier
[drm] Initialized radeon 2.33.0 20080528 for 0000:10:0d.0 on minor 0
microcode: Microcode Update Driver: v2.00 , Peter Oruba
type=1400 audit(1374380181.231:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=548 comm="apparmor_parser"
type=1400 audit(1374380181.231:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=548 comm="apparmor_parser"
type=1400 audit(1374380181.231:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=548 comm="apparmor_parser"
type=1400 audit(1374380181.231:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=525 comm="apparmor_parser"
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
bnx2 0000:05:00.0: irq 117 for MSI/MSI-X
bnx2 0000:05:00.0 eth0: using MSI
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
floppy0: no floppy controllers found
bnx2 0000:05:00.0 eth0: NIC Copper Link is Up, 100 Mbps full duplex
, receive & transmit flow control ON
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (755) killed by TERM signal
audit_printk_skb: 51 callbacks suppressed
type=1400 audit(1374380199.467:29): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=902 comm="apparmor_parser"
type=1400 audit(1374380199.599:30): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=900 comm="apparmor_parser"
type=1400 audit(1374380199.599:31): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser"
type=1400 audit(1374380199.599:32): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser"